1. <dd id="08xxd"></dd>

        Aspirator Pump

        Home > Product > Vacuum?Pump / Pressure Pump > Aspirator Pump >

        Electrical Aspirator Pump

        Select the optimum model between two different types of pump.Both are suitable for rotary vacuum evaporation, deco...

        Model: VE-11

        Order NO.: 900701


        Specific parameters will be adjusted according to product upgrades, without notice.

        Quotation Request




        VE-11 creates a vacuum using an aspirator pump that is dependent on the vapor pressure of water. Ideal for rotary vacuum evaporators, decompressing distillatories, vacuum dryers, and vacuum filtering units.
        * Economic use of resources

        * High flow rate up to 36 L/min

        * Vacuum can be regulated between 20 mmHg and 74 mmHg

        * Employs two water flow and gas suction devices, a check valve, and an upstream prevention device

        * Housing is made of PP to enhance longevity

        * Small amounts of liquid in the machine don’t harm the systemBuilt-in circulating pump and water tank makes this unit portable and       eliminates water waste.

        * Circulating pump continuously forces water quietly across a set of aspirators, and therefore clean and efficient.

        * Included (2) metal aspirators to create a vacuum with a built-in check valve to prevent backflow of water into the aspirator pump.

        * Submerged parts: 304 stainless steel, polypropylene silicone, and nickel-coated brass.

        * Tank features a drain port and spigot for easy water changes.

        * Unlike other vacuum pumps the VE-11 can suck a little bit of solvent. (water)

        Included Accessories

        * Tank / Aspirating pump / Tank closure.

        * Two aspirators.

        * Two ø6mm (0.02?) silicone rubber tube 20cm (0.7 ft) in length and an additional ø6mm (0.02?) silicone rubber tube 100cm (3.3 ft)in length.



        Flow Rate

         36 L/min (18 L/min*2)

        Water Tank Capacity(L)

        9.5 L

        Motor Power(W)

        150 W

        Material (Water Tank)



        Water Tank(WxDxH)

        298 x 210 x 227


        330 x 265 x 390

        Absorption nozzle

        9.5 Ø x 2

        Overflow nozzle

        17 Ø

        Safety Devices

        Fuse, check valve, overheat protection

        Weight (kg)


        Order No.


        Specifications Accessories & Options
        * Vacuum gauge with regulator: to monitor and control the vacuum pressure. (between 0.0267~0.0998MPa / 7.9~29.5 ? Hg)
        * Cooling coil: to prevent vacuum from decreasing due to temperature increase.



        • CONTACT

        • WIGGENS GmbH
        • G?sslesweg 22-24, 75334 Straubenhardt, Germany
        • Tel.: +49 7248 4529088
        • E-mail: info@wiggens.com

        • Room 426, Hall A, Office Building M8, No. 1 Jiuxianqiao East Road, Chaoyang District, Beijing
        • Tel.: +86 400-809-2068
        • www.hrtoolbench.com

        About Contact Statement Privacy Policy

        Copyright © 2021 WIGGENS CO., LTD. All rights reserved.